top of page

Scholarly Publications

Papers in International Journals

  1. S. Anandhan, P. P. De, S. K. De, A. K. Bhowmick, ‘Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile).I. Effect of blend ratio and mixing sequence on mechanical properties’, Journal of Applied Polymer Science, 88, 1976 (2003). 

  2. S. Anandhan, P. P. De, S. K. De, S. Bandyopadhyay, A. K. Bhowmick, ‘Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile).II. Replacement of nitrile rubber by its vulcanizate powder’, Journal of Applied Polymer Science, 90, 2348 (2003). 

  3. S. Anandhan, P. P. De, S. K. De, S. Bandyopadhyay, A. K. Bhowmick ‘Mapping of thermoplastic elastomeric nitrile rubber/poly(styrene-co-acrylonitrile) blends using tapping mode atomic force microscopy and transmission electron microscopy’, Journal of Materials Science, 38, 2793 (2003).

  4. S. Anandhan, P. P. De, S. K. De, S. Bandyopadhyay, A. K. Bhowmick, ‘Novel thermoplastic elastomers based on acrylonitrile-butadiene-styrene terpolymer (ABS) from waste computer equipment and nitrile rubber’, Rubber Chemistry and Technology, 76, 1145 (2003).

  5. S. Anandhan, P. P. De, S. K. De, S. Swayajith, A. K. Bhowmick, ‘Thermorheological studies of novel thermoplastic elastomeric blends of nitrile rubber (NBR) and scrap computer plastics (SCP) based on acrylonitrile-butadiene-styrene terpolymer (ABS)’, Plastics, Rubber and Composites: Macromolecular Engineering, 32, 377 (2003).

  6. S. Anandhan, P. P. De, S. K. De, S. Swayajith, A. K. Bhowmick, ‘Thermorheological properties of thermoplastic elastomeric blends of nitrile rubber/poly(styrene-co-acrylonitrile) containing waste nitrile rubber vulcanizate powder’, Kautschuk Gummi Kunststoffe, 57, 599 (2004).

  7. M. Y. Choi, S. Anandhan, J. H. Youk, D. H. Baik, S. W. Seo, H. S. Lee, ‘Synthesis and characterization of in-situ polymerized segmented TPU/layered silicate clay nanocomposites’, Journal of Applied Polymer Science, 102, 3048 (2006).

  8. S. Guhathakurta, S.Anandhan, N. K. Singha, R.N. Chattopadhyay, A. K. Bhowmick, ‘Use of a waste natural gum as a multi-functional additive in rubber’, Journal of Applied Polymer Science, 102, 4897 (2006). 

  9. S. Anandhan, P. P. De, S. K. De, R. S. Rajeev, A. K. Bhowmick, ‘Thermal degradation and swelling of thermoplastic vulcanizates from NBR/poly(styrene-co-acrylonitrile) and NBR/scrap computer plastics blends', Kautschuk Gummi Kunststoffe, 62, 529 (2009).

  10. S. Anandhan, C. J. Viknesh, N.Othman and S. Sasidharan, ‘A new processing additive for natural rubber from agricultural waste’, Kautschuk Gummi Kunststoffe, 64, 44 (2011).

  11. S. Anandhan, H. G. Patil, R. R. Babu, ‘Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing’, Journal of Materials Science, 46, 7423 (2011).

  12. S. Anandhan, S. M. Sundar, T. Senthil, A. R. Mahendran, G. S. Shibulal, ‘Extruded Poly(ethylene-co-octene)/Fly Ash Composites – Value added Products from an Environmental Pollutant’, Journal of Polymer Research, 19, 9840 (2012). 

  13. S. Anandhan, K. Ponprapakaran, T. Senthil, G. George, ‘Parametric study of Manufacturing Ultrafine Polybenzimidazole Fibers by Electrospinning’, International Journal of Plastics Technology, 16, 101 (2012).

  14. B. Shivamurthy, K. U. Bhat, S. Anandhan, 'Mechanical and Sliding Wear Properties of Multi-layered laminates from Glass fabric/graphite/epoxy Composites', Materials and Design, 44, 136 (2013).

  15. S. Anandhan, A. K. Bhowmick, ‘Thermoplastic Vulcanizates from Post Consumer Computer Plastics/Nitrile Rubber Blends by Dynamic Vulcanization’, Journal of Material Cycles and Waste Management, 15, 300 (2013).

  16. T. Senthil, G. George, S. Anandhan, ‘Chemical resistant Ultrafine Poly(styrene-co-acrylonitrile) fibers by Electrospinning: Process optimization by Design of Experiment’, Polymer-Plastics Technology and Engineering, 52, 407 (2013).

  17. G. George, S. Anandhan, ‘Structural characterization of nano-crystalline Co3O4 ultra-fine fibers obtained by sol-gel electrospinning’, Journal of Sol-gel Science and Technology, 67, 256 (2013).

  18. T. Senthil, S. Anandhan, ‘Solution Electrospinning of Styrene-Acrylonitrile Random Copolymer from Dimethyl Sulfoxide’, International Journal of Plastics Technology, 17, 123 (2013).

  19. S. Anandhan, H. S. Lee, ‘Influence of Organically Modified Clay Mineral on Domain Structure and Properties of Segmented Thermoplastic Polyurethane Elastomer’, Journal of Elastomers and Plastics, 46, 217 (2014).

  20. G. George, A. Mahendran, S. Anandhan, 'Use of Nano-ATH as a Multifunctional Additive for Poly(ethylene-co-vinyl acetate-co-carbon monoxide)', Polymer Bulletin, 71, 2081 (2014).

  21. B. Shivamurthy, G. George, K. U. Bhat, S. Anandhan, ‘Influence of nano-aluminum hydroxide on tribological, mechanical and flammability properties of E-glass fabric/epoxy multi-layered laminates’, Kautschuk Gummi Kunststoffe, 67, 22 (2014).

  22. T. Senthil, S. Anandhan, 'Structure-Property Relationship of Sol-gel Electrospun ZnO Nanofibers developed for Ammonia Gas Sensing',  Journal of Colloid and Interface Science, 432, 285 (2014).

  23. G. George, S. Anandhan, 'Glass Fiber Supported NiO Nanofiber Webs for Reduction of CO and Hydrocarbon Emissions from Diesel Engine Exhaust', Journal of Materials Research,  29, 2451 (2014) .

  24. G. George, S. Anandhan, 'Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics', RSC Advances, 4, 62009 (2014).

  25. G. George, S. Anandhan, 'Electrospun Nickel Oxide Nanofiber Webs for Thermistor Applications', International Journal of Plastics Technology, 18, 374 (2014).

  26. M. Selvakumar, A. Mahendran, P. Bhagabati, S. Anandhan,  'Thermodynamic Miscibility and Thermal and Mechanical Properties of Poly(ethylene-co-vinyl acetate-co-carbon monoxide)/Poly(vinyl chloride) Blends', Advances in Polymer Technology, 34, 1 (2015).

  27. B. Shivamurthy, K. Murthy, P. C. Joseph, K. Rishi, K. U. Bhat, S. Anandhan, 'Mechanical Properties and Sliding Wear Behavior of Jatropha Seed Cake Waste/Epoxy Composites', Journal of Material Cycles and Waste Management, 17, 144 (2015).

  28. T. Senthil, S. Anandhan, 'Electrospinning of Non-woven Poly(styrene-co-acrylonitrile) Nanofibrous Webs for Corrosive Chemical Filtration: Process Evaluation and Optimization by Taguchi and Multiple Regression Analyses', Journal of Electrostatics, 73, 43 (2015).

  29. T. Senthil, S. Anandhan, ‘Fabrication of styrene-acrylonitrile random copolymer nanofiber membranes from N,N-dimethyl formamide by electrospinning’, Journal of Elastomers and Plastics, 47, 327 (2015).

  30. A. G. Patil, A. M. Shanmugharaj, S. Anandhan, ‘Interparticle Interactions and Lacunarity of Mechano-chemically Activated Fly Ash’, Powder Technology, 272, 241 (2015).

  31. G. George, S. Anandhan, 'Comparison of Structural, Spectral and Magnetic Properties of NiO Nanofibers Obtained by Sol-Gel Electrospinning from Two Different Polymeric Binders', Materials Science in Semiconductor Processing, 32, 40 (2015).

  32. G. George, L. Elias, A.C. Hegde, S. Anandhan, 'Morphological and structural characterisation of sol-gel electrospun Co3O4 nanofibres and their electro-catalytic behaviour', RSC Advances, 5, 40940 (2015).

  33. A. G. Patil, S. Anandhan, 'Influence of Planetary Ball Milling Parameters on the Characteristics of Mechano-chemically Activated Fly Ash', Powder Technology, 281, 151 (2015).

  34. G. George, S. Anandhan, 'A Comparative Study on the Physico-chemical Properties of Sol-gel Electrospun Cobalt Oxide Nanofibers from Two Different Polymeric Binders', RSC Advances, 5, 81429​ (2015).

  35. B. Shivamurthy, S. Anandhan, K. U. Bhat, 'Sliding wear and Mechanical Properties of Alumina/glass fabric/epoxy Composites', Kautschuk Gummi Kunststoffe, 68, 46 (2015).

  36. A. G. Patil, A. Mahendran, S. Anandhan, ‘Nanostructured Fly Ash as Reinforcement in a Plastomer-Based Composite: A New Strategy in Value Addition to Thermal Power Station Fly Ash’, Silicon, 8,159 (2015).

  37. A. G. Patil, M. Selvakumar, S. Anandhan, ‘Characterization of Composites based on Biodegradable Poly(vinyl alcohol) and Nanostructured Fly Ash with an Emphasis on Polymer-Filler Interaction’, Journal of Thermoplastic Composite Materials, 29, 1392 (2016).

  38. R. Roopesh, K. Geedhika, J. D’Souza, S. Anandhan, K. U. Bhat, M.J. Jaya, S. B. Fathima, R. M. Balakrishnan, ‘Optimized Microwave assisted Biosynthesis of Silver Nanoparticles from Nothapodytes foetida Leaf Extracts and its Anti-microbial Activities’, Journal of Experimental Nanoscience, 11, 840 (2016).

  39. G. George, S. Anandhan, 'Tuning Characteristics of Co3O4 Nanofiber Mats Developed for Electrochemical Sensing of Glucose and H2O2', Thin Solid Films, 610, 48 (2016).

  40. S. Janakiraman, A. Surendran, S. Ghosh, S. Anandhan, A.Venimadhav, 'Electroactive poly(vinylidene fluoride) separator for sodium ion battery with high coulombic efficiency', Solid State Ionics, 292, 130 (2016).

  41. N.R.Reddy, S.Anandhan, 'Polyaniline/Poly(styrene-co-acrylonitrile) blend nanofibers Exhibit Enhanced Ammonia and Nitrogen dioxide Sensing Characteristics', Journal of Materials Science: Materials in Electronics, 27, 13329 (2016).

  42. M. Khalifa, A. Mahendran, S. Anandhan, 'Probing the Synergism of Halloysite Nanotubes and Electrospinning on Crystallinity, Polymorphism and Piezoelectric Performance of Poly(vinylidene fluoride)', RSC Advances, 6, 114052 (2016).

  43. A. G. Patil, Poornachandra, R.Gumageri, K.Rajkumar, S. Anandhan,'Chitosan Composites Reinforced with Nanostructured Waste Fly Ash', Journal of Material Cycles and Waste Management, 19, 870 (2017). 

  44. G. George, M. Selvakumar, A. Mahendran, S. Anandhan, 'Structure−Property Relationship of Halloysite Nanotubes/Ethylene−Vinyl Acetate−Carbon Monoxide Terpolymer Nanocomposites', Journal of Thermoplastic Composite Materials, 30, 121 (2017).

  45. S. K. Jaganathan, A. Balaji, H. Mohandas, G. Sivakumar, P. Kasi, M. Selvakumar, S. B. Kadiman, S. Anandhan, A. A. Mohd Faudzi, E. Supriyanto, M. Mandal, 'Hemocompatibility of Sulfuric Acid-Treated Metallocene Polyethylene and its Application in Reducing the Quantity of Medical Plastic Waste', Polymer-Plastics Technology and Engineering, 56, 240 (2017).

  46. B. Sachin Kumar, A.M.Shanmugharaj, S.K.Kalpathy, S. Anandhan, 'Some New Observations on the Structural and Phase Evolution of Nickel Titanate Nanofibers', Ceramics International, 43, 6845 (2017).

  47. C. Shamitha, T. Senthil, Lixin Wu, B. Sachin Kumar, S. Anandhan, 'Sol-gel Electrospun Mesoporous ZnMn2O4 nanofibers with High Specific Surface area',  Journal of Materials Science: Materials in Electronics, 28, 15846 (2017).

  48. T. Senthil, S. Anandhan, 'Effect of Solvents on the Solution Electrospinning of Poly(styrene-co-acrylonitrile)', Kautschuk Gummi Kunststoffe, 70, 44 (2017).

  49. B. Sachin Kumar, S.K.Kalpathy, S. Anandhan, 'Synergism of Fictitious Forces on Nickel Cobaltite Nanofibers: Electrospinning Forces Revisited', Physical Chemistry Chemical Physics, 20, 5295 (2018).

  50. B. Sachin Kumar, A. N. Prakrthi, T. Senthil, K. U. Bhat, S. Anandhan, 'Organoclay enabled Nanofiber formation from a Polyolefin Elastomer', Advances in Polymer Technology, 37, 1278 (2018).

  51. M. Khalifa, B. Deeksha, A. Mahendran, S. Anandhan, 'Synergism of Electrospinning and Nano-Alumina trihydrate on polymorphism, crystallinity and piezoelectric performance of PVDF nanofibers', JOM, 70, 1313 (2018).

  52. B. Sachin Kumar, V. C. Gudla, R. Ambat, S.K.Kalpathy, S. Anandhan, 'A Mechanistic Study on the Structure Formation of NiCo2O4 Nanofibers decorated with In-Situ formed Graphene-like Structures', Journal of Inorganic and Organometallic Polymers and Materials, 28, 1885 (2018).

  53. B. Sachin Kumar, C. Dhanasekhar, A. Venimadhav, S. K. Kalpathy, S. Anandhan, 'Pyrolysis-controlled synthesis, and magnetic properties of sol-gel electrospun nickel cobaltite nanostructures', Journal of Sol-Gel Science and Technology, 86, 664 (2018).

  54. B. Shivamurthy, Krishna Murthy, S. Anandhan, 'Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites', Advances in Tribology, vol. 2018, article ID 1508145 (2018).

  55. A. G. Patil, A. Mahendran, M. Selvakumar, S. Anandhan, 'Ductility and Flame Retardancy Enhancement of PVC by Nanostructured Fly Ash', Silicon, 11, 2241 (2019).

  56. M. Khalifa, A. Mahendran, S. Anandhan, 'Durable, Efficient and Flexible Piezoelectric Nanogenerator from Electrospun PANi/HNT/PVDF Blend Nanocomposite', Polymer Composites, 40, 1663 (2019).

  57. M. Khalifa, S. Janakiraman, S. Ghosh, A. Venimadhav, S. Anandhan, 'High Performance Gel Polymer Electrolyte for Lithium Ion Battery from PVDF/Halloysite Nanocomposite-based Non-Wovens', Polymer Composites, 40, 2320 (2019).

  58. S. Janakiraman, A. Surendran, S. Ghosh, S. Anandhan, A. Venimadhav, 'A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application', Materials Research Express, 6, 35303 (2019).

  59. S. Janakiraman, A. Surendran, R. Biswal, S. Ghosh, S. Anandhan, A. Venimadhav, 'Electrochemical characterization of a polar β-phase poly (vinylidene fluoride) gel electrolyte in sodium ion cell', Journal of Electroanalytical Chemistry, 833, 411 (2019).

  60. M. Khalifa, A. Mahendran, S. Anandhan, 'Synergism of Graphitic-carbon nitride and Electrospinning on the Physico-chemical characteristics and Piezoelectric Properties of Flexible Poly(vinylidene fluoride) based Nanogenerator',  Journal of Polymer Research, 26, 73 (2019).

  61. B. Sachin Kumar, V. C. Gudla, R. Ambat, S.K.Kalpathy, S. Anandhan, 'Graphene Nanoclusters Embedded Nickel Cobaltite Nanofibers as Multifunctional Electrocatalyst for Glucose Sensing and Water-splitting Applications', Ceramics International, 45, 25078 (2019).

  62. S. Janakiraman, A. Surendran, R. Biswal, S. Ghosh, S. Anandhan, A. Venimadhav, 'Electrospun electroactive polyvinylidene fluoride-based fibrous polymer electrolyte for sodium ion batteries', Materials Research Express, 6, 86318 (2019).

  63. B. Sachin Kumar, K. Tarafder, A. R. Shetty, A. C. Hegde, V. C. Gudla, R. Ambat, S.K. Kalpathy, S. Anandhan, 'Polymorph Nickel Titanate Nanofibers as Bifunctional Electrocatalyst towards Hydrogen and Oxygen Evolution Reactions', Dalton Transactions, 48, 12684 (2019).

  64. R. Singh, S. Janakiraman, M. Khalifa, S. Anandhan, S. Ghosh,  A. Venimadhav, K. Biswas, 'An electroactive ß‒phase polyvinylidene fluoride as gel polymer electrolyte for magnesium‒ion battery application', Journal of Electroanalytical Chemistry, 851, 113417 (2019).

  65. M. Khalifa, S. Anandhan, 'PVDF Nanofibers with Embedded Polyaniline-Graphitic Carbon Nitride Nanosheet Composites for Piezoelectric Energy Conversion', ACS Applied Nanomaterials, 2, 7328 (2019).

  66. S. Shetty, G. S. Ekbote, A. Mahendran, S. Anandhan, 'Polymorphism, dielectric and piezoelectric response of Organo-modified Ni-Co layered double hydroxide nanosheets dispersed electrospun PVDF nanofabrics', Journal of Materials Science: Materials in Electronics, 30, 20703 (2019).

  67. C. Shamitha, A. Mahendran, S. Anandhan, 'Effect of Polarization Switching on Piezoelectric and Dielectric Performance of Electrospun Nanofabrics of PVDF/Ca-Al LDH Nanocomposite', Journal of Applied Polymer Science, 137, 48697 (2020).

  68. C. Shamitha, A. R. Shetty, A. C. Hegde, S. Anandhan, 'Sol-gel electrospun ZnMn2O4 nanofibers as bifunctional electrocatalyst for hydrogen and oxygen evolution reactions', Materials Research Express, 6, 1150g7 (2019).

  69. S. Janakiraman, M. Khalifa, R. Biswal, S. Ghosh, S. Anandhan, A. Venimadhav, 'High performance electrospun nanofiber coated polypropylene membrane as a separator for sodium ion batteries', Journal of Power Sources, 460, 228060 (2020).

  70. S Shetty, A. Mahendran, S, Anandhan, 'Development of a new flexible nanogenerator from electrospun nanofabric based on PVDF/talc nanosheets composite', Soft Matter, 16, 5679 (2020).

  71. M. Khalifa, G. Ekbote, S. Anandhan, G. Wuzella , H. Lammer, A. Mahendran, 'Physico-chemical Characteristics of Bio-Based Thermoplastic Polyurethane/ Graphene Nanocomposite for Piezo-resistive Strain Sensor', Journal of Applied Polymer Science, 137, 49364 (2020).

  72. M. Khalifa, S. Anandhan, G. Wuzella , H. Lammer, A. Mahendran, 'Thermoplastic Polyurethane Composites Reinforced with Renewable and Sustainable Fillers-A Review', Polymer-Plastics Technology and Materials, 59, 1751 (2020).

  73. B. Shivamurthy, S. Anandhan, K. U. Bhat, B.H.S. Thimmappa, 'Structure-property relationship of glass fabric/MWCNT/epoxy multilayered laminates', Composites Communications, 22, 100460 (2020).

  74. R. Singh, S. Janakiraman, M. Khalifa, S. Anandhan, S. Ghosh,  A. Venimadhav, K. Biswas, 'A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery', Journal of Materials Science: Materials in Electronics, 31, 22912 (2020).

  75. G. S. Ekbote, M. Khalifa, A. Mahendran, S. Anandhan, 'Cationic Surfactant Assisted Enhancement of Dielectric and Piezoelectric Properties of PVDF nanofibers for Energy Harvesting Application', Soft Matter, 17, 2215 (2021).

  76. B. Shivamurthy, S. Anandhan, K. U. Bhat, B.H.S. Thimmappa, 'Thermal and Flammability Properties of Glass Fabric/MWCNT/Epoxy Multilayered Laminates', Transactions on Electrical and Electronic Materials, 22, 889 (2021).

  77. G. George, A. Mahendran, M. Selvakumar, S. Anandhan, 'Influence of MWCNTs on the structure and properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide) nanocomposite', Polymer Composites, 42, 4412 (2021).

  78. M. Khalifa, S. Anandhan, 'Highly sensitive and wearable NO2 gas sensor based on PVDF nanofabric containing embedded polyaniline/g-C3N4 nanosheet composites', Nanotechnology, 32, 485504 (2021).

  79. B. Sachin Kumar, C. Dhana Sekhar, S. Anandhan, S.K. Kalpathy, 'Magnetic Behaviour of Polymorph Composite Nickel Titanate Nanofibers', New Journal of Chemistry, 45, 17438 (2021).

  80. S. Shetty, A.M.Shanmugharaj, S. Anandhan, 'Physico‑chemical and piezoelectric characterization of electroactive nanofabrics based on functionalized graphene/talc nanolayers/PVDF for energy harvesting', Journal of Polymer Research, 28, 419 (2021).

  81. M. Khalifa, E. Schoeffmann, H. Lammer,A. Mahendran, G. Wuzella, S. Anandhan, 'A study on electroactive PVDF/mica nanosheet composites with enhanced γ-phase for capacitive and piezoelectric force sensing', Soft Matter, 17, 10891 (2021).

  82. S Shetty, S. Murugesan, S. Salehi , A. Pellert, M. Scheibel, T. Scheibel, S, Anandhan, 'Evaluation of piezoelectric behavior and biocompatibility of PVDF ultrafine fibers with incorporated talc nanosheets', Journal of Applied Polymer Science,139, e52631 (2022).

  83. M.Khalifa, S. Shashank, S. Pathery, S. Anandhan, 'Piezoelectric energy harvesting using flexible self-poled electroactive nanofabrics based on PVDF/ZnO-decorated SWCNT nanocomposites',  JOM, 74, 3162 (2022).

  84. Swathilakshmi, S. Anandhan, 'Recent development in carbon dots-based gas sensors', Sensors & Diagnostics, 1, 901 (2022). 

  85. C. Shamitha, S. Janakiraman, S. Ghosh, A. Venimadhav, K. N. Prabhu, S. Anandhan, 'Synthesis and Evaluation of a New Gel Polymer Electrolyte for High-performance Li-ion Batteries from Electrospun Nanocomposite of PVDF/Ca-Al Layered Double Hydroxide',  Journal of Materials Research,  37, 3942 (2022). 

  86. G. S. Ekbote, M. Khalifa, B. V. Perumal, S. Anandhan, 'Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics', Flexible and Printed Electronics, 8, 025011 (2023).

  87. N. N. Prabhu, B.V. Rajendra, S. Anandhan, G. George, R.B. Jagadeesh Chandra, B. Shivamurthy, 'Understanding the Interplay of solution and process parameters on the physico-chemical properties of ZnO nanofibers synthesized by sol-gel electrospinning', Materials Research Express, 10, 085001 (2023).

  88. G. S. Ekbote, M. Khalifa, B. V. Perumal, S. Anandhan, 'A new multifunctional energy harvester based on mica nanosheets-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects', RSC Applied Polymers, 1, 266 (2023) (invited paper as part of the themed collection: Celebrating the scientific accomplishments of RSC Fellows). 

  89. N. N. Prabhu, B. Shivamurthy, S. Anandhan, B.V. Rajendra, R.B. Jagadeesh Chandra, M. Srivatsha, 'An investigation on the acetone and ethanol vapor-sensing behavior of sol-gel electrospun ZnO nanofibers using an indigenous set-up', ACS Omega, 8, 49057 (2023). 

  90. M. Khalifa, Manish Kumar, G. Subramanian, S. Anandhan, 'A facile strategy to achieve high piezoelectric performance in electrospun poly(vinylidene fluoride) non-woven nanofabrics', Transactions on Electrical and Electronic Materials, 25, 201 (2024).

  91. H. G. Patil, S. A. Rajendran, N. Lenka, B. S. Kumar, S. Murugesan, S. Anandhan, 'Probing the Influence of Strontium Doping and Annealing Temperature on Structure and Biocompatibility of Hydroxyapatite Nanorods', Dalton Transactions, 53, 7812 (2024) (Invited Article).

  92. M. Khalifa, H. Lammer, S. Anandhan, 'Ionic Surfactant assisted PVDF nanofabrics with High Dielectric and Excellent Piezoelectric Performance', Fibers and Polymers, published online: 2 July 2024, DOI: 10.1007/s12221-024-00603-7.

  93. N. N. Prabhu, B. Shivamurthy, S. Anandhan, B.V. Rajendra, R.B. Jagadeesh Chandra, 'Synthesis and Characterization of Cu-doped ZnO nanofibers for Ethanol Vapor Sensing', Cogent Engineering, 11, Article ID: 2403702 (2024).

  94. N. N. Prabhu, B. Shivamurthy, S. Anandhan, B.Rajendra, S.D.Kulkarni, 'Effect of Ni doping on the acetone vapor sensing performance of ZnO nanofibers', Ceramics International , DOI: 10.1016/j.ceramint.2024.11.055 (in press).

  95. H. G. Patil, S. A. Rajendran, N. Lenka, S. Anandhan, S. Murugesan, 'Development of Electrospun Scaffolds for Bone Regeneration from Strontium-Doped Hydroxyapatite Nanorods and Thermoplastic Polyurethane Elastomer', Biomedical Physics & Engineering Express (in review).

  96. T. Sathies, S. Anandhan, 'Progress in Additive Manufacturing of Piezoelectric and Triboelectric Energy Harvesters', (in pipeline).

  97. G.S.Ekbote, T. Sathies, S. Anandhan, 'Piezoelectric Electrospun PVDF nanofibers: A review on the effect of electrospinning and filler-polymer interaction on β-phase and piezoelectric response', (in pipeline).

  98. M.Khalifa, S. Janakiraman, R. Biswal, S. Ghosh, A. Venimadhav, S. Anandhan, 'Enhancing Safety and Electrochemical Performance of Sodium Ion Battery using Halloysite nanotube/Poly(vinylidene fluoride) composite Nanofabric-Based Gel Polymer Electrolyte', (in pipeline).

  99. S. Khare, S. Anandhan, B. S. Kumar, 'Weaving Success: Mask R-CNN Model for Precise Defect Detection in Electrospun Nanofibers', (in pipeline).

  100. G. S. Ekbote, P. Annadurai, S. Anandhan, 'Physico-mechanical Characterization of Ni-Co layered double hydroxide-dispersed Nitrile rubber Nanocomposites for Potential Application in Encapsulation of Underwater Transducers', (in pipeline).
     

  1. ​G. Rajkumar, R. Kamatchi, G. Jeevanayagi, R. Karthikeyan, M. Dhanasankar, S. Anandhan, 'Method of Manufacturing Nanosilver with Controlled Size and Shape' (Indian Patent: #249056, date of grant: 28 September 2011).

  2. G. Venugopalan, R. Bhandary, S. Anandhan, H.G. Patil, ‘Bilayer scaffold combining Gelatin, Hyaluronic Acid, and Copper Nanoparticles, created using electrospinning, on Polydopamine-coated Titanium implants’ (Indian Patent, Application number: TEMP/E-1/67908/2024-CHE, date of filing: 2nd August 2024).

Patents
 
Book chapters 
 

  1. S. Anandhan, A. M. Shanmugharaj, A. K. Bhowmick, ‘Waste Rubber Recycling’, in ‘Current Topics in Elastomers Research’, ISBN: 0849373174, A. K. Bhowmick, Ed., CRC Press, USA, 2008.

  2. S. Anandhan, S. Bandyopadhyay, ‘Polymer nanocomposites: from synthesis to applications’ (DOI: 10.13140/2.1.3550.0482), in ‘Nanocomposites and Polymers with Analytical Methods’, ISBN: 978-953-307-352-1, J. Cuppoletti, Ed., InTech, Croatia, 2011.

  3. A.G.Patil, S.Bandyopadhyay, S.Anandhan, 'Fly ash based Polymer Matrix Composites', in 'Advances in Polymer Materials and Technology', S. Anandhan and S. Bandyopadhyay, Eds., CRC Press, USA, 2016.

  4. T. Senthil, G. George, S. Anandhan, 'Electrospinning of Polymers: Fundamentals and Applications', in 'Advances in Polymer Materials and Technology', S. Anandhan and S. Bandyopadhyay, Eds., CRC Press, USA, 2016.

  5. G. George, B.Sachin Kumar, S.Anandhan, 'Polymer nanocomposites for food packaging applications', in 'Advances in Polymer Materials and Technology', S. Anandhan and S. Bandyopadhyay, Eds., CRC Press, USA, 2016.

  6. S. Janakiraman, M. Khalifa, R. Biswal, S. Ghosh, S. Anandhan, and A. Venimadhav, 'Comparative Studies on Crystalline and Amorphous Vinylidene Fluoride Based Fibrous Polymer Electrolytes for Sodium-Ion Batteries' in 'Recent Research Trends in Energy Storage Devices', pp: 55-64, ISBN: 978-981-15-6393-5,  Y. Sharma et al. Eds., Springer Nature, Singapore, 2021.

  7. G. George, Z. Luo, T. Senthil, S. Anandhan, 'Sol-gel Electrospinning of Diverse Ceramic Nanofibers and their Potential Applications', in 'Electrospun Polymers and Composites: Ultrafine Materials, High Performance Fibres, and wearables', ISBN: 9780128196113, D. Yu, A. Baji, and S. Ramakrishna, Eds., Woodhead publishing Ltd, Elsevier, USA, January 2021.

  8. S. Shetty, S. Anandhan, 'Electrospun PVDF based composite nanofabrics : An emerging trend towards energy harvesting', Ch. 10, in 'Nano Tools & Devices for Enhanced Renewable Energy', ISBN: 9780128217092, S. Devasahayam, C. Hussain, Eds., Elsevier, UK, 2021.

  9. S. Anandhan, S. Murugesan, A. G. Patil, 'Fly ash-reinforced poly(vinyl alcohol) composites', Ch. 8, in 'Handbook of Fly Ash', ISBN: 9780128176863, K.K.Kar, Ed., Elsevier, UK, 2021.

  10. S. Janakiraman, S. Anandhan, A. Venimadhav, 'Recent developments of polymer electrolytes for rechargeable sodium-ion batteries', in 'Progress in Polymer Research for Biomedical, Energy and Specialty Applications', ISBN: 9781032061009, S. Anandhan, A. Mahendran, M. Selvakumar, Eds., CRC Press, USA, 2022.

  11. M. Khalifa, C. Shamitha, S. Shetty, S. Anandhan, 'Polymer Nanocomposites based Wearable Smart Sensors' in 'Progress in Polymer Research for Biomedical, Energy and Specialty Applications', ISBN: 9781032061009, S. Anandhan, A. Mahendran, M. Selvakumar, Eds., CRC Press, USA, 2022.

  12. M. Khalifa, S. Murugesan, S. Anandhan, 'Graphene-Based Elastomer Nanocomposites: A Fascinating Material for Flexible Sensors in Health Monitoring', Ch. 14, in 'Graphene-Rubber Nanocomposites: Fundamentals to Applications', ISBN: 9781003200444, T. Mondal, A. K. Bhowmick, Eds., CRC Press, USA, 2022.

  13. R. Singh, M. Khalifa, S. Janakiraman, A. Venimadhav, S. Anandhan, K.Biswas, 'Polymer electrolytes and separators for magnesium ion batteries', Ch. 7, Vol. 1, in 'Advanced Technologies for Rechargeable Batteries', ISBN: 9781003310167, P. Raghavan, A. Das, J. Fatima M. J., Eds, CRC press, USA, August 2024.

  14. M. Khalifa, S. Anandhan, 'Spectroscopic Characterization of Carbon Nanofiller-Rubber Composites', in 'Lightweight Composites: Mechanics, Processing, Properties, and Applications', M. Doddamani, P. Menezes, M. Gupta, Eds., Elsevier, UK, 2024.

  15. T. Sathies, G.S.Ekbote, S. Anandhan, 'Piezoelectric and triboelectric nanogenerators based on electrospun PVDF-nanofiller composites', in 'Energy Harvesting Properties of Electrospun Nanofibers', J. Fang and T. Lin, Eds., IOP,  UK, 2nd Edn, 2024.

Papers/Abstracts in Conference Proceedings
 

  1. S. Anandhan, P. P. De, S. K. De, A. K. Bhowmick, ‘Recycling of NBR waste: Replacement of NBR in thermoplastic elastomeric NBR/SAN blend by ground NBR vulcanizate’, Rubcon 2002, India, January 2002.

  2. H. S. Lee, M. Y. Choi, S. Anandhan, D. H. Baik, S. W. Seo, ‘Microphase structure and physical properties of polyurethane/organoclay nanocomposites’, ACS PMSE preprints, 91, 638 (2004).

  3. S. Guhathakurta, S. Anandhan, N. K. Singha, R.N. Chattopadhyay, A. K. Bhowmick, ‘Use of a waste natural gum as a multi-functional additive in rubber’, paper # 58, ACS rubber division meeting, October 2004.

  4. S. Anandhan, M. Y. Choi, N. R. Shin, D. H. Baik, S. W. Seo, H. S. Lee, ‘TPU/clay nanocomposites: A comparative study of the properties of nanocomposites prepared by solution and in-situ processes’, Korean Polymer Society Meeting, October 2004.

  5. S. Anandhan, M. Y. Choi, N. R. Shin, D. H. Baik, S. W. Seo, H. S. Lee, ‘Thermal properties of polyurethane/layered silicate clay nanocomposites’, Korean Fiber Society Meeting, October 2004.

  6. S. Anandhan , M. Y. Choi, D. H. Baik, S. W. Seo, H. S. Lee, ‘Effect of layered silicate clay on microphase structure of TPU’, International Conference on Advances in Polymer Blends, Composites, IPNs and Gels : Macro to Nano Scales [ICBC 2005], India, March 2005 (Invited paper).

  7. J. Joshuaraj, M. Y. Choi, H. S. Lee, S. Anandhan, ‘Polyurethane/layered silicate clay nanocomposites’, Conference of Applied Sciences CAS 2006, Malaysia, June 2006.

  8. S. Anandhan, M. Y. Choi, H. S. Lee, ‘Synthesis and characterization of polyurethane/layered silicate clay nanocomposites’, International Composites Conference ACUN-5, Australia, July 2006 (Invited paper).

  9. S. Anandhan, K.Udaya Bhat, B. Shivamurthy, ‘Three Body Abrasive Wear Study of a Hybrid Composite based on Epoxy’, Advancements in Polymeric Materials APM-2010, India, February 2010 (Invited paper).

  10. S. Anandhan, H. G. Patil, R. Rajesh Babu, ‘Synthesis and characterization of nanocomposites based on ethylene-vinyl acetate-carbon monoxide terpolymer and layered silicate clay’, International Conference on Recent Trends in Materials Science and Technology ICMST-2010, India, October 2010 (Invited paper).

  11. B. Shivamurthy, K. Udaya Bhat, S. Anandhan, ‘Mechanical and erosion wear study of areca nut shell fibre reinforced epoxy composites’, NMD-ATM 2010, India, November 2010.

  12. B. Shivamurthy, K. Udaya Bhat, S. Anandhan, ‘Influence of graphite on sliding wear resistance and mechanical properties of GE composites, NMD-ATM 2010, India, November 2010.

  13. Akshata G. Patil, S. Anandhan, ‘Preparation and characterization of nanostructured fly ash’, International Conference ICNSNT-2011, India, March 2011.

  14. T. Senthil, S. Anandhan, ‘Characterization of ZnO Nanofiber Arrays Obtained by Electrospinning’, India-Australia International Workshop on Nano technology in Materials and Energy Application, India, December 2011.

  15. S. Anandhan, S. Madhava Sundar, ‘Fly Ash/Engage® Composites – Value added Products from a by-product of Energy Industry’, International conference on Recent Advances and Challenges in Energy (RACE-2012), India, January 2012 (Invited paper).

  16. T. Senthil, S. Anandhan, 'Electrospinning of Poly(styrene-co-acrylonitrile)', First Indo-US conference on Polymers for Packaging Applications, India, March 2012 (Invited paper).

  17. B. Shivamurthy, Krishna Murthy, P. C. Joseph, K. Rishi, K. Udaya Bhat, S. Anandhan, ‘Wear and Mechanical properties of Jatropha seed cake particulate/Epoxy Composites’, Third International Conference on  Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP – 2012), India, October 2012 (Invited paper).

  18. Akshata G. Patil, S. Anandhan, ‘Ethylene-octene copolymer/ball milled Fly Ash Composites’, Third International Conference on  Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP – 2012), India, October 2012 (Invited paper).

  19. T. Senthil, S. Anandhan, ‘Electrospinning of Styrene-acrylonitrile Random Copolymer from N,N-dimethyl formamide: Process Optimization by Multiple Regression Analysis’, Third International Conference on  Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP – 2012), India, October 2012 (Invited paper).

  20. G. George, K. Ponprapakaran, T. Senthil, S. Anandhan, ‘Fabrication of Ultrafine Polybenzimidazole Nanofibers by Electrospinning for High Temperature Applications’, Third International Conference on  Natural Polymers, Bio-Polymers, Bio-Materials, their Composites, Blends, IPNs, Polyelectrolytes and Gels: Macro to Nano Scales (ICNP – 2012), India, October 2012 (Invited paper). 

  21. T. Senthil, S. Anandhan, ‘Electrospun Styrene-Acrylonitrile Copolymer Nanofiber Mats for Filtration Applications: Process Optimization by Taguchi Method’, International Conference on Rubber and Rubber like Materials (ICRRM – 2013), India, March 2013.

  22. G. George, S. Anandhan, ‘Cobalt Oxide Nanofibers through Electrospinning’, International Conference on Rubber and Rubber like Materials (ICRRM – 2013), India, March 2013.

  23. T. Senthil, S. Anandhan, ‘Characterization of Nanocrystalline Zinc Oxide Nanofibrous Webs obtained by Sol-gel Electrospinning’, International Conference on 'Advancements in Polymeric Materials APM-2014', CIPET-Bhubaneswar, India, February 2014 (Invited paper).

  24. G. George, S. Anandhan, 'Electrospun Nickel Oxide Nanofiber Webs for Thermistor Applications', International Conference on 'Advancements in Polymeric Materials APM-2014', CIPET-Bhubaneswar, India, February 2014.

  25. B. Shivamurthy, V. Srinivas, K. Kapoor, R. Jain, K. U. Bhat, S. Anandhan, 'Wear and Mechanical Properties of Cryogenically treated Carbon fabric/multiwalled carbon nanotube/epoxy Hybrid Composites', International Conference on 'Advancements in Polymeric Materials APM-2014', CIPET-Bhubaneswar, India, February 2014.

  26. G. George, S. Anandhan, 'Removal of Pollutants from Engine Exhaust Gas by Supported Nickel Oxide Nanofibrous webs Produced by Sol-gel Electrospinning', International Conference on Polymers and Allied Materials ICPAM-2014, IIT Patna, India, May 2014.

  27. Akshata G. Patil, S. Anandhan, 'Interparticle Interactions and Lacunarity of Mechano-Chemically Activated Fly Ash', Two Days-International Seminar on Frontiers of Ceramic and Materials Technology for cement Industries, Indian Ceramic Society, Bangalore Chapter and Dept. of Ceramic and Cement Technology, PDA College of Engineering, Gulbarga, India, November 2014 (Won the best paper award).

  28. G. George, S. Anandhan, 'Influence of Polymeric Binders on Structural, Spectral and Magnetic Properties of NiO Nanofibers Obtained by Sol-Gel Electrospinning', International Conference on 'Advancements in Polymeric Materials APM-2015', CIPET-Chennai and IISc, Bangalore, India, February 2015 (Invited paper).

  29. B.Sachin Kumar, A.N.Prakrthi, S.Anandhan, 'Nanoclay-assisted Electrospinning of Poly(ethylene-co-octene)', International Conference on 'Advancements in Polymeric Materials APM-2015', CIPET-Chennai and IISc, Bangalore, India, February 2015.

  30. A. Mahendran, A. G. Patil, S. Anandhan, H. Lammer, 'Nanostructured fly ash as reinforcement in a plastomer-based composite: a newStrategy to reduce greenhouse emission from thermal power station', International Conference on Biopolymer Materials and Engineering, Slovenj Gradec, April 2015.

  31. S. Janakiraman, A. Surendran, S. Ghosh, S. Anandhan, A. Venimadhav, 'Fabrication and Performance of Electroactive Gel Polymer Electrolyte for  Sodium ion Battery', NMD-ATM 2015, India, November 2015.

  32. S. Janakiraman, A. Surendran, S. Ghosh, S. Anandhan, A. Venimadhav, 'Synthesis and electrochemical studies of electroactive amorphous separator system for sodium ion battery', MRS Fall Meeting & Exhibit, Massachusetts,  USA, Nov-Dec, 2016.

  33. Z. Abbas, M. Surendran, P.A. Anjana, P.K.Jidev, H. Dasari, N. S. Naidu, S. Anandhan, K. U. Bhat, G.U.Babu, H. P. Dasari, 'Solubility Limits of Ceria-Zirconia-Lanthana Solid-Solutions', Materials Today: Proceedings, Volume 4, Pages 9347-10662 (2017),  International Conference on Recent Trends in Engineering and Material Sciences (ICEMS-2016), March 17-19, 2016, Jaipur, India.

  34. B.Sachin Kumar, S.K.Kalpathy, S. Anandhan, ‘Electrospun Nanofibers of Spinel/Ilmenite Nickel Titanate’, International Conference on Material Science and Technology (ICMST-2016), St. Thomas College, Kerala, India, June 2016.

  35. S. Janakiraman, A. Surendran, S. Ghosh, S. Anandhan, A.Venimadhav, 'Electroactive gel polymer electrolyte for Lithium ion battery with good ionic conductivity', International Conference on Advances in Materials & Materials Processing (ICAMMP-2016), IIT Kharagpur, India, November 2016.

  36. B. Sachin Kumar, A.M.Shanmugharaj, S.K.Kalpathy, S. Anandhan, 'Some New Observations on the Structural and Phase Evolution of Nickel Titanate Nanofibers', International Conference on Advanced Materials (SCICON '16), Amrita University, Coimbatore, December 2016 (Invited paper).

  37. M. Khalifa, S. Janakiraman, S. Ghosh, A. Venimadhav, S. Anandhan, 'Development of Halloysite nanotubes/Poly(vinylidene fluoride) Nanocomposite Nanofiber Separator for Lithium Ion Battery', Second International Conference on Advanced Polymeric Materials (ICAPM 2017), M. G. University, India, April 2017 (Invited paper). 

  38. B. Sachin Kumar, V. C. Gudla, R. Ambat, S.K.Kalpathy, S. Anandhan, 'Structural and Magnetic Properties of Polymorphic Nickel Titanate Nanofibers', 12th Pacific Rim Conference on Ceramic and Glass Technology, The American Ceramic Society, Hawaii, USA, May 2017.

  39. M. Khalifa, S. Janakiraman, S. Ghosh, A. Venimadhav, S. Anandhan, 'New Gel Polymer Electrolyte from Electrospun PVDF/Halloysite Nanocomposite-based Non-woven Fabric for Lithium Ion Battery', International Conference on Nanotechnology: Ideas, Innovations and Initiatives (ICN:3I-2017), IIT Roorkee, Uttarakhand, India, December 2017.

  40. M. Khalifa, A. Mahendran, S. Anandhan, 'Durable, Efficient and Flexible Piezoelectric Nanogenerator from Electrospun PANi/HNT/PVDF Nanocomposite', International Conference on 'Advancements in Polymeric Materials APM-2018', CIPET-Bhubaneswar, India, February 2018 (Invited paper).

  41. C. Shamitha, T. Senthil, L. Wu, B. Sachin Kumar, and S. Anandhan, 'Structural and morphological characterization of ZnMn2O4 nanofibers obtained by sol-gel electrospinning', International Conference on ‘Nanoscience and Technology’ (ICONSAT-2018), CeNSe, IISc, Bengaluru, India, March 2018.

  42. B. Sachin Kumar, V. C. Gudla, R. Ambat, S.K. Kalpathy, S. Anandhan, 'Graphene Nanoclusters Embedded Nickel Cobaltite Nanofibers as Multifunctional Electrocatalyst for Glucose Sensing and Water-splitting Applications', International Conference on 'Advanced Ceramics and Nanomaterials for Sustainable Development', CHRIST University, Bangalore, India, September 2018.

  43. S. Shetty, G. Ekbote, A. Mahendran, S. Anandhan, 'Enhanced electro-active phase content and piezoelectric response of electrospun Ni-Co Layered double hydroxide/poly(vinylidene fluoride) (PVDF) nanocomposite non-woven webs', International Conference on 'Advancements in Polymeric Materials APM-2019', CIPET-Chennai, India, January 2019.

  44. C. Shamitha, A. Mahendran, S. Anandhan, 'Enhanced piezoelectric and dielectric performance of PVDF Nanofibers via polarization switching due to the cooperative effect of layered double hydroxide nanosheets and in situ Stretching by electrospinning', International Conference on 'Advancements in Polymeric Materials APM-2019', CIPET-Chennai, India, January 2019.

  45. S. Janakiraman, A. Surendran, R. Biswal, S. Ghosh, S. Anandhan, A. Venimadhav, 'Preparation of nanofibrous electroactive polyvinylidene fluoride based polymer electrolyte for sodium ion batteries', E-MRS Spring Conference, France, May 2019.

  46. S. Shetty, A. Mahendran, S. Anandhan, 'Promotion of electroactive crystalline phase in talc/ poly(vinylidene fluoride) (PVDF) based nanofibrous webs', International Conference on Advances in Polymeric Materials & Human Healthcare, Goa, India, October 2019.

  47. S. Anandhan, 'Enhancement of Dielectric and Piezoelectric Properties of PVDF nanofibers for Energy Harvesting Application: Role of Nanofillers', International Conference on 'Advancements in Polymeric Materials APM-2021', CIPET-Bhubaneswar, India, March 2021 (Keynote paper).

  48. G. George, H. Manikandan, T.M.A. Kumar, S. Joshy, A.C. Sanju, S. Anandhan, 'Effect of nanofillers on the crystalline and mechanical properties of EVACO polymer nanocomposites', Materials Today Proceedings: International Conference on Sustainable materials, Manufacturing and Renewable Technologies 2021, 22-23 April 2021, DOI: 10.1016/j.matpr.2021.04.613.

  49. G. George, A. P. Dev, N. N. Ashok, M.S. Anoop, S. Anandhan, 'Dispersion Analysis of Nanofillers and its Relationship to the Properties of the Nanocomposites', Materials Today Proceedings: International Conference on Sustainable materials, Manufacturing and Renewable Technologies 2021, 22-23 April 2021, DOI: 10.1016/j.matpr.2021.05.285.

  50. S. Anandhan, 'PVDF Nanocomposite-based Electrospun Fabrics for Various Applications', International e-Conference on 'Advancements in Polymeric Materials APM-2022', CIPET-Chennai, India, March 2022 (Keynote paper).

  51. S. Anandhan, 'Piezoelectric smart textiles based on PVDF nanocomposites for energy harvesting and sensing applications', National Conference on New Developments in Polymeric Materials (DPM-2023), SPS India, March 2-3, 2023 (Invited paper).

  52. G. S. Ekbote, S. Anandhan, 'Design and Development of Barium Tungstate Nanorods dispersed Electroactive Polymer Nano fabrics for Piezoelectric and Triboelectric Energy Harvesting', International Conference on 'Advancements in Polymeric Materials APM-2023', CIPET-Bengaluru, India, March 17-19, 2023 (Keynote paper).

  53. M. Khalifa, S. Janakiraman, R. Biswal, S. Ghosh, A. Venimadhav, S. Anandhan, 'Enhancing Safety and Electrochemical Performance of Sodium Ion battery using Halloysite nanotube/Poly(vinylidene fluoride) composite Nanofabric-based Gel Polymer Electrolyte', National Conference on Materials Science and Technology (NCMST 2024), St. Thomas College, Palai, Kottayam, 21-23 February 2024 (invited paper).

  54. H. G. Patil, S. A. Rajendran, N. Lenka, S. Murugesan, S. Anandhan, 'Synthesis and assessment of biocompatibility of TPU-based scaffolds containing Sr-doped hydroxyapatite nanorods', International Conference on 'Advancements in Polymeric Materials APM-2024', CIPET-Ahmedabad, India, March 2024 (Invited paper).

bottom of page